Kit stéréo – Micros Omnidirectionnels
Description
Paire de microphones DPA d:dicate 2006A.
Fourni dans une boite Peli cases extrêmement résistante, ce kit stéréo est composé des éléments suivants :
- 2 micros d:dicate 2006A, appairées en sensibilité (+/- 1.5dB)
- 1 boite Peli cases
- 2 pinces de fixation
- 2 bonnettes anti-vent
Caractéristiques techniques
Specifications for d:dicate™ 2006A Twin Diaphragm Omni Microphone
Directional pattern: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
Frequency range: 20 Hz to 20 kHz
Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz
Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
Minimum load impedance: 2 kohm
Dynamic range: Typ. 114 dB
Max. SPL, peak before clipping: 141 dB
Switchable attenuator: 0 dB / -20 dB
Output impedance: < 200 ohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common Mode Rejection Ratio (CMRR): > 60 dB
Power supply (for full specifications): 48 V Phantom power (± 4 V)
Current consumption: 2.8 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: – phase
Color: Matte black
Microphone weight: 160 g (5.6 oz)
Microphone diameter: 19 mm (0.75 in)
Microphone length: 164 mm (6.5 in)
Output voltage, RMS: > 5 V
Polarity: +V at Pin 2 for positive sound pressure
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%
